On-server PVT

Our Product

Following the record-setting JEDI-100, JEDI-200 is Kolmostar’s most advanced ultra-low-power GNSS module, which once again refreshes the industry record of the lowest power consumption. Built on the superior performance of the Kolmo JEDI GNSS engine, it integrates SAW filter, stand-alone LNA, and TCXO, and follows the industry proven 12mm x 16mm form factor for easy RF integration.
Designed for IoT applications, and optimized for integration with LPWAN technologies such as LoRaWAN®/NB-IoT, etc., JEDI-200 achieves industry record low power consumption. Compared with traditional GNSS sensors, JEDI-200 reduces the energy to get one position fix by up to 120x.


Ultra Low Energy Consumption
- 25 mJ/position
(measured in real environment)

Fast time to fix
- 1 second TTFF (time to first fix)

Accurate position fix
- 5.0m CEP

A-GPS via LPWAN to further minimize power and TTFF
- 50 Byte compressed ephemeris file for speedy download & only 1 refresh every 12 hours needed
- 50 Byte raw position data (Beta Release: up to 100 Byte) for efficient narrow-band upload and auxiliary high-performance cloud computing

  • Features
  • Receiver Type
  • Nav. Update Rate
  • Position Accuracy
  • TTFF (Aided Start)
  • Package and Interface
  • Package
  • Interface
  • Quality and Reliability
  • Storage Temp.
  • Operating Temp.
  • Electrical Data
  • Supply Voltage
  • Energy Consumption
  • JEDI-200
  • GPS L1; Beidou B1I
  • Up to 1 Hz
  • 5.0m CEP
  • 1 s
  • Package and Interface
  • 24pin 12.0 x 16.0 x 2.5mm
  • 1 UART
  • Quality and Reliability
  • -40 °C to +85 °C
  • -40 °C to +85 °C
  • Electrical Data
  • 2.8V
  • 25 mJ/position

- GPS+LPWAN position tracker. Use GPS to get the position, and use LPWAN to transmit data. The position needs to be updated every two hours.
- Challenges: A-GPS is widely used to provide ephemeris (EPH) to GPS sensors in phones. However, the ephemeris file can be as big as 15 KB, which is too big for narrowband LPWAN transmission channels such as LoRaWAN®/NB-IoT.
- In practice, traditional GPS sensors in LPWAN devices download ephemeris directly from GNSS satellites.This process takes more than 30 seconds and costs lots of energy.
Our Solution:
Our solution reduces the ephemeris file from 15 KB to 50 Byte and it only needs to be refreshed once every 12 hours. This greatly reduces power consumption while also enables A-GPS via LoRaWAN®/NB-IoT.
JEDI-200 consumes an energy consumption of 25 mJ per position as its power consumption is 25 mW and TTFF is only 1 second with A-GPS. In comparison, traditional GPS consumes about 80 to 100mW every second and TTFF is more than 30 seconds if ephemeris needs to be downloaded. As a result of these advantages, our solution reduces the energy of GPS to get one position by up to 120x.